[Network Control]; [Status]; [Initialize]; [Off] - Panasonic PT-LZ370EA Operating Instructions (Functional Manual)

[NETWORK CONTROL]

You can set this function to control the projector from
a computer connected via the network.
1) Press ▲▼ to select [NETWORK
CONTROL].
2) Press ◀▶ to switch [NETWORK
CONTROL].
▶
z Each time you press the button, the settings
change as follows.
[ON]
Enables the control function from
[ON] a computer connected via the
network.
Disables the control function from

[OFF]

a computer connected via the
network.

[STATUS]

You can display the network status of the projector.
1) Press ▲▼ to select [STATUS].
2) Press the <ENTER> button.
▶
z The [STATUS] screen is displayed.

[INITIALIZE]

You can restore the network settings to the factory
default settings.
1) Press ▲▼ to select [INITIALIZE].
2) Press the <ENTER> button.
▶
z [INITIALIZE] is displayed.
Note
z The security password entry is required if you have
set [ON] in the [SECURITY] menu → [PASSWORD]
(

[OFF]
3) Press ◀▶ to select [OK], and press
the <ENTER> button.
[NETWORK] menu
page 73).
ENGLISH - 77