Connections; Before Connecting To The Projector - Panasonic PT-LZ370EA Operating Instructions (Functional Manual)

Connections

Connections

Before connecting to the projector

z Read carefully the instruction manual for the device to be connected.
z Turn off the power switch of the devices before connecting cables.
z If any connection cable is not supplied with the device, or if no optional cable is available for the connection of
the device, prepare a necessary system connection cable.
z Video signals containing too much jitter may cause the images on the screen to randomly wobble or wafture. In
this case, a time base corrector (TBC) must be connected.
z The projector accepts video signals, S-video signals, analog RGB signals (with TTL sync. Level), and digital
signals.
z Some computer models are not compatible with the projector.
z Refer to "List of compatible signals" (
projector.
■ <S-VIDEO IN> terminal pin assignments and signal names ▶
Outside view
(1)
(3)
■ <COMPUTER IN> terminal pin assignments and signal names ▶
Outside view
(11) (15)
(6) (6)
(1)
30 - ENGLISH
page 114) for the types of video signals that can be used with the

Pin No.
(1)
(2)
(2)
(3)
(4)
(4)
Pin No.
(1)
(2)
(3)
(10) (10) (12)
(13)
(14)
(5)
(15)
Signal name
GND (luminance signal)
GND (color signal)
Luminance signal
Color signal
Signal name
R/P
R
G/G, SYNC/Y
B/P
B
DDC data
HD/SYNC
VD
DDC clock
(4) and (9) are not used.
(5) - (8), (10), and (11) are GND
terminals.