Table of Contents
Advertisement
<LAMP> and <TEMP> indicators
■ Temperature indicator <TEMP>
▶
z Illuminates red during projection.
Indicator
status
z Flashing red when the power is turned off (projection stops automatically).
Problem
The temperature inside and/or outside the projector is abnormally high.
z Is the ventilating
Cause
z Remove any objects
Solution
Note
z If the temperature indicator <TEMP> is still illuminating or flashing after taking the preceding measures, ask
your dealer to repair the unit.
96 - ENGLISH
(The message [REFER TO THE "TEMP indicator" SECTION IN THE OPERATION MANUAL.]
is displayed on the projection screen.)
z Is the room
port (intake/exhaust)
temperature too
blocked?
high?
z Place the projector
that are blocking
in an environment
the ventilating port
with temperature
(intake/exhaust).
and humidity as
designated in the
specifications.
(
z Is the air filter unit
clogged?
z Clean or replace
the air filter unit.
(
page 97)
page 117)
z Is the projector used
at high elevations
1 400 m (4 593 ft) or
higher sea level?
z The projector can
only be used for two
minutes after turning
on the power. Set
[HIGH ALTITUDE
MODE] (
page 65)
to [ON] within two
minutes of turning
on the power.
Advertisement
Chapters
Table of Contents
