[Menu Lock Password]; [Control Device Setup] - Panasonic PT-LZ370EA Operating Instructions (Functional Manual)

[MENU LOCK PASSWORD]

You can change the MENU LOCK PASSWORD.
1) Press ▲▼ to select [MENU LOCK
PASSWORD].
2) Press the <ENTER> button.
▶
z The [MENU LOCK PASSWORD] screen is
displayed.
3) Press ▲▼◀▶ to select the text, and
press the <ENTER> button to enter the
text.
▶
z Up to 16 characters can be entered.
4) Press ▲▼◀▶ to select [OK], and
press the <ENTER> button.
▶
z Select [CANCEL] to stop.
Attention
z The initial password when used for the first time or
after initializing is "AAAA".
z Change the password periodically that is hard to
guess.

[CONTROL DEVICE SETUP]

You can enable/disable the button operations on the
control panel and the remote control.
1) Press ▲▼ to select [CONTROL
DEVICE SETUP].
2) Press the <ENTER> button.
▶
z The [CONTROL DEVICE SETUP] screen is
displayed.
3) Press ▲▼ to select an item, and press
◀▶ to change the setting.
▶
z When the confirmation message is displayed
after setting [DISABLE], select [OK] and press
the <ENTER> button.
■ [CONTROL PANEL] ▶
▶
z You can set the limitation on the control from
the control panel.
Enables the button operation from
[ENABLE]
the main unit.
Disables the button operation from
[DISABLE]
the main unit.
[SECURITY] menu
■ [REMOTE CONTROLLER] ▶
▶
z You can set the limitation on the control from
the remote control.
Enables the button operation from
[ENABLE]
the remote control.
Disables the button operation from
[DISABLE]
the remote control.
Note
z It will not be possible to turn off the power (standby
status) if the operations of both of [CONTROL
PANEL] and [REMOTE CONTROLLER] are set to
[DISABLE].
Canceling [DISABLE] setting:
Press the <ENTER> button while holding down
the <MENU> button for at least two seconds on
the main unit controls to reset the [DISABLE]
setting on [CONTROL PANEL] to [ENABLE].
Use the control panel of the projector to change
the setting of [REMOTE CONTROLLER].
ENGLISH - 75