Using The Function Button; Using The Eco Management Function; Resetting To The Factory Default; Adjusting The Volume - Panasonic PT-LZ370EA Operating Instructions (Functional Manual)

Using the Function button

The <FUNC1> to <FUNC3> buttons on the remote
control can be assigned to any frequent operations to
be used as shortcut buttons.
FUNC1 FUNC2 FUNC3
Press the <FUNC1> to <FUNC3> button
on the remote control.
■ To assign functions to the ▶
<FUNC1> to <FUNC3> buttons
1) Press the <MENU> button on the
remote control or the projector to
select a menu option (main menu, sub-
menu, or advanced menu).
▶
z Refer to "Navigating through the menu"
( page 42) for on-screen menu operations.

2) Hold down any of the <FUNC1> to
<FUNC3> buttons on the remote
control for at least three seconds.
Note
z When the setting is complete, the assigned menu
item appears on the right of the remote control
operation guidance area on the lower part of the
menu screen.
Using the ECO management
function
Displays the setting screen for the ECO management.
button
Press the <ECO> button on the remote
control.
Note
z For details, refer to the [PROJECTOR SETUP]
menu → [ECO MANAGEMENT] (
Returns the settings for sub-menu or adjustment
values to the factory default.
button
Press the <DEFAULT> button on the
remote control.
z Refer to "To reset to the factory default" (
Adjusts the volume of the audio output.
Press the <VOLUME +> or <VOLUME - >
button on the remote control.
page 67).

Remote control operation
Resetting to the factory
default
button
Note
for details.

Adjusting the volume

button
<VOLUME +>
Increases the volume.
<VOLUME - >
Decreases the volume.
page 43)

ENGLISH - 41