Menu navigation
Menu navigation
The on-screen menu (Menu) is used to perform various settings and adjustments of the projector.
Navigating through the menu
■ Operating procedure
▶
button
1) Press the <MENU> button on the
remote control or the control panel.
▶
z The main menu screen is displayed.
PICTURE
POSITION
LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
SECURITY
NETWORK
2) Press ▲▼ to select the main menu
item.
▶
z The selected item is highlighted in yellow.
▶
z The sub-menu of the selected main menu item
is displayed on the right.
PICTURE
POSITION
LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
SECURITY
NETWORK
42 - ENGLISH
PICTURE MODE
STANDARD
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
COLOR TEMPERATURE
DYNAMIC IRIS
ON
WAVEFORM MONITOR
ADVANCED MENU
DAYLIGHT VIEW
AUTO
DIGITAL CINEMA REALITY
NOISE REDUCTION
RGB/YC
C
AUTO
B
R
KEYSTONE
0
SHIFT
H :
V :
OVER SCAN
ASPECT
NORMAL
FRAME LOCK
OFF
3) Press the <ENTER> button.
▶
z Sub-menu items become selectable.
4) Press ▲▼ to select the sub-menu
item, then press ◀▶ to change the
settings or adjust the parameter
values.
z For some items, press ◀▶ to display an
▶
individual adjustment screen with a bar scale as
shown in the following diagram.
KEYSTONE
▶
z For items that are only names, pressing the
<ENTER> button displays the next screen and
advanced settings can be performed.
0
0
Note
z Pressing the <RETURN> or <MENU> button
0
when the menu screen is displayed returns to the
0
previous screen.
z Some items may not be adjusted or used for certain
signal formats being input to the projector.
z Some items can be adjusted even if signals are not
input.
0
z Individual adjustment screen is cleared
automatically if no operation is performed for
approximately five seconds.
z Refer to "Main menu" (
(
pages 44 to 45) regarding the menu items.
0
0
0
page 44) or "Sub menu"