Network
Network control
Set when you want to control the projector from a
computer connected to the network.
1 )
Press ▲ ▼ to select [Network control].
2 )
Press <ENTER> button to select [On]
or [Off] with the ▲ ▼ buttons.
Network status
This function shows the LAN setting environment of
the currently selected projector.
1 )
Press ▲ ▼ to select [Network status].
2 )
Press <ENTER> button or the ► button
to show the information of the current
projector status.
AMX D.D.
This function allows the projector to be detected by
AMX Device Discovery. For more details, visit the
following website.
http://www.amx.com/
1 )
Press ▲ ▼ to select [AMX D.D.].
2 )
Press
<ENTER> button to select [On]
or [Off] with the ▲▼ buttons.
62
- ENGLISH
RoomView
This function allows the projector to monitor and
control the projector through network with Crestron
RoomView.
1 )
Press ▲ ▼ to select
2 )
Press
<ENTER> button to select [On]
or [Off] with the ▲▼ buttons.
This projector supports the following application
software from Crestron company.
• RoomView Express
• Fusion RV
• RoomView Server Edition
"Crestron RoomView" is a system developed by
Crestron Electronics, Inc. which collectively manage
and control multiple system devices connected via
the network, from a computer. This projector supports
"Crestron RoomView".
For details of "Crestron RoomView", refer to the Crestron
Electronics, Inc. website (Provided only in English).
http://www.crestron.com/
For the download of "RoomView Express", refer to the Cre-
stron Electronics, Inc. website (Provided only in English).
http://www.crestron.com/getroomview
Network factory default
You can reset the network setting to the factory
default of the projector.
1 )
Press ▲ ▼ to select [Network factory
default], and press <ENTER> button.
2 )
A confirmation box appears and select
[Yes] and then press <ENTER> button.
3 )
Another confirmation box appears and
select [Yes] and then press <ENTER>
button.
[RoomView].