Power Indicator - Panasonic PT-LZ370EA Operating Instructions (Functional Manual)

Switching on/off

Power indicator

The power indicator indicates the power status. Check the status of the power indicator <ON (G)/STANDBY (R)>
before operating the projector.
Indicator status
No illumination or flashing
Red
Green
Orange
Note
z The power
z The projector consumes electrical power even when the power is off (when the power indicator <ON
(G)/STANDBY (R)> illuminates or flashes red). Refer to "Power consumption" (
consumption.
34 - ENGLISH
The main power is switched off.
When [STANDBY MODE] is set to [ECO], the power is switched off.
(The projector is in the standby mode.)
Lit Press the power
z Does not operate when the lamp indicator <LAMP> or temperature
indicator <TEMP> is flashing. (
When [STANDBY MODE] is set to [NORMAL], the power is switched
off. (The projector is in the standby mode.)
Flashing Press the power
z Does not operate when the lamp indicator <LAMP> or temperature
indicator <TEMP> is flashing. (
The projector is preparing to project.
Flashing
Projection starts after a while.
Lit Projecting.
The projector is preparing to switch off the power.
Lit The power is switched off after a while. (Changes to the standby
mode.)
The power
Flashing
The projector is preparing to project. Projection starts after a while.
button is pressed in the power off operation, it may take some time to enter projection mode.
Status
button to start projection.
page 95)

button to start projection.
page 95)

button is pressed in the power off operation.
page 116) for the power
