[BACK COLOR]
You can set the color of the projected image when
there is no signal input.
1) Press ▲▼ to select [BACK COLOR].
2) Press ◀▶ to switch [BACK COLOR].
▶
z The setting will change as follows each time
you press the button.
[BLUE]
[USER LOGO]
The entire projection area appears
[BLUE]
blue.
The entire projection area appears
[BLACK]
black.
[DEFAULT
Projects the Panasonic logo.
LOGO]
Projects the logo transferred with
[USER LOGO]
"Logo Transfer Software"
*1: "Logo Transfer Software" is included in the attached CD-
ROM.
[SXGA MODE]
This function is used if the whole projected image is
not displayed when SXGA signal is input.
Set it to [SXGA] normally.
1) Press ▲▼ to select [SXGA MODE].
2) Press ◀▶ to switch [SXGA MODE].
▶
z The setting will change as follows each time
you press the button.
[SXGA]
When [SXGA] is set and the whole
[SXGA]
projected image is displayed
When [SXGA] is set and the whole
[SXGA+]
projected image is not displayed
[BLACK]
[DEFAULT LOGO]
.
*1
[SXGA+]
[DISPLAY OPTION] menu
[OTHER FUNCTIONS]
■ [AUTO SETUP]
▶
Refer to "Using the Automatic setup function"
(
page 40) for details.
■ [FREEZE]
▶
You can freeze the projected image and stop
the sound temporarily, regardless of the playing
condition of the external device.
To release the setting, press the <RETURN>
button or the <FREEZE> button on the remote
control.
■ [AV MUTE]
▶
You can stop the projection and the sound when
you will not be using the projector for a while.
To release the setting, press the <RETURN>
button or the <AV MUTE> button on the remote
control.
ENGLISH - 63