[Picture] Menu; [Picture Mode]; [Contrast] - Panasonic PT-LZ370EA Operating Instructions (Functional Manual)

[PICTURE] menu

[PICTURE] menu
Select [PICTURE] from the main menu, and
select the item from the sub-menu.
Refer to "Navigating through the menu"
( page 42) for the operation of the menu

screen.
z After selecting the item, press ▲▼◀▶ to set.

[PICTURE MODE]

You can switch to the desired picture mode suitable
for the image source and the environment in which
the projector is used.
1) Press ▲▼ to select [PICTURE MODE].
2) Press ◀▶ or press the <ENTER>
button.
▶
z The [PICTURE MODE] individual adjustment
screen is displayed.
3) Press ◀▶ to switch [PICTURE MODE].
▶
z The setting will change as follows each time
you press the button.
[STANDARD]
[CINEMA] *1
[NATURAL]
*2
*1: When movie-based signals are input
*2: When still image signals are input
[STANDARD]
[DYNAMIC]
[BLACKBOARD]
[WHITE
BOARD]
[DICOM SIM.] *1
[CINEMA]
[NATURAL]
*1: Set the items other than [PICTURE MODE] to the factory
default.
46 - ENGLISH
[DYNAMIC] [BLACKBOARD]
[DICOM SIM.] [WHITE BOARD]
The picture becomes suitable for
moving images in general.
The light output is maximized for
use in bright areas.
The picture becomes suitable for
projecting on a black board.
The picture becomes suitable for
projecting on a white board.
The picture becomes similar to
that of DICOM Part 14 Grayscale
Standard.
The picture becomes suitable for
movie sources.
The picture complies with sRGB.
Note
z The factory default picture modes are [DYNAMIC]
for still image input signals and [STANDARD] for
movie-based input signals.
z DICOM, the abbreviation of "Digital Imaging and
Communication in Medicine", is a standard for
medical imaging technology. Although the name
DICOM is used in the setting item, this projector
is not for a medical use. Do not use the projected
images for diagnostic purposes.

[CONTRAST]

You can adjust the contrast of the colors.
1) Press ▲▼ to select [CONTRAST].
2) Press ◀▶ or press the <ENTER>
button.
▶
z The [CONTRAST] individual adjustment screen
is displayed.
3) Press ◀▶ to adjust the level.
Operation Adjustment
Brightens the
screen and makes
Press ▶ .
the color of image
deeper.
Darkens the screen
and makes the
Press ◀ .
color of image
lighter.
Attention
z Adjust [BRIGHTNESS] first when you need to
adjust [BRIGHTNESS] and [CONTRAST].
Range
Maximum
value +64
Minimum
value - 64