Control Commands Via Lan - Panasonic PT-LZ370EA Operating Instructions (Functional Manual)

Technical information
■ PJLink security authentication ▶
The password used for PJLink is the same as that of the password set for the web browser control.
When using PJLink without security authentication, do not set a password for the web browser control.
▶
z For specifications regarding PJLink, refer to the Japan Business Machine and Information System
Industries Association website.
URL http://pjlink.jbmia.or.jp/english/

Control commands via LAN

■ When Web Control administrator rights password is set (Protect mode) ▶
▶
zConnection method
1) Obtain the IP address and port number (Initial set value = 1024) of the projector and
request for a connection to the projector.
You can obtain the IP address from the menu screen of the projector, and the port number from the Web
Control page.
IP address
Port No.
2) Check the response from the projector.
Response data
Data section
"NTCONTROL"
(ASCII string)
9 bytes
Mode: 1 = Protect mode
3) Generate a 32-byte hash value from the following data using MD5 algorithm.
"xxxxxx:yyyyy:zzzzzzzz"
xxxxxx
yyyyy
zzzzzzzz
108 - ENGLISH
Obtain from the main menu → [NETWORK] → [STATUS]
Obtain from Web Control [Detailed set up] → [Command port set up] page
Blank Mode
' ' '1'
0x20 0x31
1 byte 1 byte
Administrator rights user name for Web Control (default user name is "admin1").
Password of above administrator rights user (default password is "panasonic").
8-byte random number obtained in Step 2)
Blank Random number section
"zzzzzzzz"
' '
(ASCII code hexadecimal
0x20
number)
1 byte 8 bytes
Termination
symbol
(CR)
0x0d
1 byte