[Over Scan]; [Aspect] - Panasonic PT-LZ370EA Operating Instructions (Functional Manual)

[POSITION] menu

[OVER SCAN]

Use the following steps to make adjustments when
text and images on the periphery of the projected
image are not properly displayed.
1) Press ▲▼ to select [OVER SCAN].
2) Press ◀▶ or press the <ENTER>
button.
▶
z The [OVER SCAN] individual adjustment
screen is displayed.
3) Press ◀▶ to adjust the level.
▶
z The adjustment values are 0 to +10.
Note
z This item is not available for still image computer
(RGB) signals.

[ASPECT]

You can switch the aspect ratio of the image.
1) Press ▲▼ to select [ASPECT].
2) Press ◀▶ or press the <ENTER>
button.
▶
z The [ASPECT] individual adjustment screen is
displayed.
3) Press ◀▶ to switch the setting.
▶
z The setting will change as follows each time
you press the button.
■ When S-video/video signal is ▶
input
[AUTO]
[NATIVE]
Note
z [AUTO] is enabled only when an NTSC signal is
input for both S-video and video signals.
56 - ENGLISH
[NORMAL] [H FIT]
[FULL]
■ When still image computer (RGB) ▶
signal is input
▶
zFor 1280 x 720 input
[NORMAL] [S16:9]
▶
zFor VGA70, VGA85, 1280 x 768, 1280 x
800, WXGA+, or WSXGA+ signal input
[NORMAL] [S16:9]
[NATIVE]
▶
zFor WUXGA input
[NORMAL]
[FULL]
▶
zFor other still image computer (RGB)
signal input
[NORMAL]
[NATIVE]
*1
*1: UXGA cannot be switched to [NATIVE].
■ When HDMI signal is input ▶
▶
zFor 1125 (1080)/60i, 1125 (1080)/50i,
1125 (1080)/60p, 1125 (1080)/50p, 1125
(1080)/24p input
[NORMAL]
▶
zFor 750 (720)/60p, 750 (720)/50p input
[NORMAL] [S16:9]
▶
zFor 525p (480p), 625p (576p) input
[NORMAL]
[NATIVE]
[NATIVE]
[H FIT]
[FULL]
[S16:9]
[H FIT]
[H FIT]
[FULL]
[S16:9]
[NATIVE]
[H FIT]
[FULL]