Table of Contents
Advertisement
Chapter 3 Basic Operations — Switching on/off the projector
Power indicator
Indicate the status of the power. Check the status of the power indicator <开（绿）/待机（红）> before operating
the projector.
Indicator status
Off
Red
Green
Orange
Note
f While the power indicator <开（绿）/待机（红）> lights in orange, the fan is running to cool the projector.
f The projector consumes power even in standby mode (power indicator <开（绿）/待机（红）> lit in red). Refer to "Maximum power
consumption" (x page 304) for the power consumption.
f When the projector receives the signal from the remote control, the power indicator <开（绿）/待机（红）> will blink in the following color
according to the status of the projector.
g When the projector is in projection mode: Green
g When the projector is in standby mode: Orange
f The power indicator <开（绿）/待机（红）> will blink slowly in green while the shutter function is in use (shutter: closed), or while the
function of the [PROJECTOR SETUP] menu → [NO SIGNAL SETTING] → [NO SIGNAL LIGHTS-OUT] (x page 187) is operating and the
light source is turned off.
Power indicator < 开 （绿） ／ 待机 （红） >
The main power is switched off.
The power is switched off. (standby mode)
Projection will start when the power on <b> button is pressed.
Lit
f The projector may not operate when the light source indicator <光源> or the
temperature indicator <温度> is blinking. (x page 278)
The output image equivalent to the projected image from the projector is being
Blinking
viewed using the web control function. For details, refer to "[Remote preview] page"
(x page 235).
Lit
Projecting.
The projector is preparing to switch off the projector.
Lit
The power is switched off after a while. (Changes to the standby mode.)
Projector status
ENGLISH - 65
Advertisement
Table of Contents
