Table of Contents
Advertisement
Powering ON/OFF
POWER indicator
The power indicator informs you the status of the power. Confirm the status of the <POWER> indicator before
operating the projector.
Indicator status
No illumination or flashing
RED
Flashing
GREEN
Flashing
26
- ENGLISH
POWER indicator
The power cord is unplugged.
The power cord is plugged.
Lit
The projector is in stand-by mode, after the cooling is completed.
The projector is cooling down. The projector cannot be turned on until cooling is
completed and the <POWER> indicator stops blinking.
The temperature inside the projector is abnormally high and the projector is cooling
down. And the <WARNING> indicator also blinks in red (
cannot be turned on until cooling is completed and the <POWER> indicator stops
blinking.
Lit
Projecting.
The projector is in stand-by status with [Power management] function.
The projection lamp will be turned on if the input signal is reconnected or any
button on the control panel or remote control is pressed. (
Status
Æ
page 73). The projector
Æ
page 53)
Advertisement
Table of Contents
