Switching on/off the projector
Connecting the power cord
Make sure that the supplied power cord is securely fixed to the projector body to prevent it from being
removed easily.
Use the power cord matching with the power supply voltage and the shape of the outlet.
For details of power cord handling, refer to "Read this first!". (x page 4)
For the shape of the outlet, refer to "Usable outlet" (x page 32).
Note
f The supplied power cords vary depending on the country or region where you purchased the product.
Attaching the power cord
1)
Check the shapes of the <AC IN> terminal on the back of the projector and the power cord connector,
then insert the connector completely in the correct direction.
Removing the power cord
1)
Confirm that the projector is in standby mode, and remove the power plug from the outlet.
2)
Remove the power cord connector from the <AC IN> terminal.
Power indicator
Displays the status of the power. Check the <ON(G)/STANDBY(R)> status of the power indicator before operating
the projector.
44 - ENGLISH
Chapter 3 Basic Operations - Switching on/off the projector
Power indicator <ON(G)/STANDBY(R)>