Table of Contents
Advertisement
Manual Mode
A trigger pull activates a decode session. The decode session continues until the barcode is decoded or
you release the trigger or decode session timeout expires.
Decode Session Timeout
This parameter sets the maximum time decode session continues during a scan attempt. It is
programmable in 1ms increments from 100ms to 3,600,000ms. When it is set to 0, the timeout is infinite.
The default setting is 3,000ms. To learn how to program this parameter, see Appendix 5.
33
Chapter 3 Scan Mode
** Manual Mode
Decode Session Timeout
Enter Setup
** Exit Setup
Advertisement
Table of Contents
