Scan Mode
Level Mode: A trigger pull activates a decode session. The decode session continues until a barcode is decoded or you
release the trigger.
Continuous Mode: The scanner automatically starts one decode session after another. To suspend/resume barcode
reading, simply press the trigger. Reread Timeout can avoid undesired rereading of same barcode in a given period of time.
Level Mode
Decode Session Timeout
This parameter sets the maximum time decode session continues during a scan attempt. It is programmable in 1ms
increments from 1ms to 3,600,000ms. When it is set to 0, the timeout is infinite. This feature is only applicable to the Pulse,
Sense and Level modes.
35
Chapter 9 System Settings
Decode Session Timeout
Enter Setup
Continuous Mode
** Exit Setup