Table of Contents
Advertisement
Custom prefix
The custom prefix adds a user-defined string before the decoded information. For example, it is allowed to add a custom prefix and set the prefix to a string "AB" , The reading data is "123"
After the barcode, the scanner is "123" Add before the string "AB" String, received by the host "AB123" .
* * 【Prohibited】
Modify custom prefix
Custom read first " Modify custom prefix " , And then read in order the value of each byte in the prefix string to be set 16 Base value, read last " Save Settings " Complete the custom prefix setting. Note: The
total length of the custom prefix string cannot exceed 10 Characters, the character range is 0x00~0xFF .
145
Set the custom prefix to " CODE "( 16 The base value is 0x43/0x4F/0x44/0x45 ):
1.
read " Startup settings "
2.
read " Modify custom prefix " code
3.
Read the following data code: "4" "3" "4" "F" "4" "4" "4" "5"
4.
read " save " code
5.
read " Exit settings "
After this setting is completed, as long as the custom prefix is set to " Enable " , Then read any barcode, the scanner will add the custom
Suffix string "CODE" .
【Modify custom prefix】
Startup settings
【Enable】
Exit settings
Advertisement
Table of Contents
