Program The Central Area; Program The Custom Prefix/Suffix; Program The Terminating Character Suffix - Newland HR22 Dorada User Manual

g. Program the Central Area
Example: Set the percentage of central area to 20%
1. Scan the Enter Setup barcode.
2. Scan the Specify Central Area barcode.
3. Scan the numeric barcodes "2" and "0".
4. Scan the Save barcode.
5. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)
h. Program the Custom Prefix/Suffix
Example: Set the custom prefix to "CODE"
1. Check the hex values of "CODE" in the ASCII Table. ("CODE": 43, 4F, 44, 45)
2. Scan the Enter Setup barcode.
3. Scan the Set Custom Prefix barcode. (See the "Set Custom Prefix" section in Chapter 6)
4. Scan the numeric barcodes "4", "3", "4", "F", "4", "4", "4" and "5".
5. Scan the Save barcode.
6. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)
i. Program the Terminating Character Suffix
Example: Set the terminating character suffix to 0x0D
1. Scan the Enter Setup barcode.
2. Scan the Set Terminating Character Suffix barcode. (See the "Set Terminating Character Suffix"
section in Chapter 6)
3. Scan the numeric barcodes "0" and "D".
4. Scan the Save barcode.
5. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)
150