Mitsubishi Electric FR-F820-04750 Instruction Manual page 448

(T) Multi-Function Input Terminal Parameters
● When the RT signal is ON, the following second functions are selected at the same time.
Function
Torque boost
Base frequency
Acceleration time
Deceleration time
Electronic thermal O/L relay
Free thermal
Motor permissible load level
Stall prevention
Applicable motor
Motor constant
Offline auto tuning
Online auto tuning
PID control
PID Pre-charge function
Speed control gain
Analog input filter
Torque control gain
Torque detection filter
Tab. 5-128: Functions, that can be set as second functions
The function can be changed by switching the RT signal ON/OFF while the inverter is stopped. If
a signal is switched during operation, the operation method changes after the inverter stops,
(Pr. 450 ≠ 9999).
NOTES RT signal is assigned to the terminal RT in the initial status. Set "3" in any of Pr. 178 to Pr. 189 (input
terminal function selection) to assign the RT signal to another terminal.
Changing the terminal assignment using Pr. 178 to Pr. 189 (input terminal function selection) may
affect the other functions. Set parameters after confirming the function of each terminal.
Parameters referred to
Pr. 178 to Pr. 189
5 - 286
First function
Parameter number
Pr. 0
Pr. 3
Pr. 7
Pr. 8
Pr. 9
Pr. 600 to Pr. 604
Pr. 607
Pr. 22
Pr. 71
Pr. 80 to Pr. 84,
Pr. 89 to Pr. 94, Pr. 298,
Pr. 702, Pr. 706, Pr. 707,
Pr. 711, Pr. 712, Pr. 717,
Pr. 721, Pr. 724, Pr. 725,
Pr. 859
Pr. 96
Pr. 95
Pr. 127 to Pr. 134
Pr. 760 to Pr. 764
Pr. 820, Pr. 821
Pr. 822, Pr. 826
Pr. 824, Pr. 825
Pr. 827
(input terminal function selection)
Second function
Parameter number
Pr. 46
Pr. 47
Pr. 44
Pr. 44, Pr. 45
Pr. 51
Pr. 692 to Pr. 696
Pr. 608
Pr. 48, Pr. 49
Pr. 450
Pr. 453 to Pr. 457, Pr. 560,
Pr. 569, Pr. 458 to Pr. 462,
Pr. 738 to Pr. 747, Pr. 860
Pr. 463
Pr. 574
Pr. 753 to Pr. 758
Pr. 765 to Pr. 769
Pr. 830, Pr. 831
Pr. 832, Pr. 836
Pr. 834, Pr. 835
Pr. 837
=> page 5-279
Parameters
Refer to page
5-515
5-517
5-99
5-99
5-145
5-145
5-175
5-291
5-297,
5-310
5-297,
5-310
5-321
5-347
5-379
5-52
5-258
5-52
5-56