Mitsubishi Electric FR-F820-04750 Instruction Manual page 365

Parameters
Hiding the decimal places for the monitors (Pr. 268)
The numerical figures after a decimal point displayed on the operation panel may fluctuate during
analog input, etc. The decimal places can be hidden by selecting the decimal digits with Pr. 268.
Pr. 268 setting
9999 (initial value)
Tab. 5-92:
NOTE The number of display digits on the cumulative energization time (Pr. 52 = "20"), actual operation
time (Pr. 52 = "23"), cumulative power (Pr. 52 = "25") and cumulative energy saving (Pr. 52 = "51")
does not change.
FR-F800
Description
No function
For the first or second decimal places (0.1 increments or 0.01 increments) of the monitor, numbers in
0 the first decimal place and smaller are rounded to display an integral value (1 increments). The
monitor value equal to or smaller than 0.99 is displayed as 0.
When monitoring with the second decimal place (0.01 increments), the 0.01 decimal place is
1 dropped and the monitor displays the first decimal place (0.1 increments). When monitoring with
the first decimal place, the display will not change.
Selection of decimal digits
(M) Monitor display and monitor output signal
5 - 203