Returning To The Previous Step Or Exiting The User Settings Menu; Keys Used For Navigation And Settings; Setting The Zone Bypass Option - Visonic PowerMaster-360R User Manual

Menus and functions
A.2 Returning to the previous step or exiting the USER SETTINGS menu
During the setting process it is frequently necessary to return to the previous setting step or option (i.e. "to go
one level up") or to exit the User Settings menu.
A. To move one level up
To move one level up during the setting process, click
previous setting step:
B. To exit the USER SETTINGS menu
Any screen
or
<OK> TO EXIT
READY 12:00
A.3 Keys used for navigation and settings
You can use the keypad for various programming functions. The following table provides a description of the
keys and their functions:
Key Definition
Next
Back
OK
Fire alarm
Volume Up
Arm away
PGM On
Volume down
Arm home
PGM Off
Chime
OFF
Event log
PGM Control
Cancel entry delay
Partition
Emergency alarm
0 – 9
N/A
B.1 Setting the zone bypass option
Bypassing permits arming only part of the system while allowing free movement of people within certain zones
18
To exit [USER SETTINGS], move up the menu by pressing
until the display reads [<OK> TO EXIT], or preferably, press
brings you immediately to the exit screen [<OK> TO EXIT].
When the display reads [<OK> TO EXIT], press
The system exits the [USER SETTINGS] menu and returns to the normal disarm
state while showing the READY display.
Navigation / Setting Function
Move forward to the next menu options.
Move backward to the previous menu options.
Select a menu option or to confirm a setting or action.
Configure a fire alarm.
Increase volume.
Arm building when empty.
Manual activation of a light or other household electrical appliance that
is connected to PGM output.
Decrease volume.
Arm building when occupied.
Manual deactivation of a light or other household electrical appliance
that is connected to PGM output.
Turn on or off chime.
Disarm system.
Review the event log.
Select the active automatic control method:

Sensors: The appliance is controlled by sensors (assigned
by the installer for this).

Timer: The appliance is controlled by a timer (ON and OFF
times are defined by the installer).

Both: The appliance is controlled by sensors as well as by a
timer.
Cancel entry delay when system is armed to home or away.
Select a partition.
Configure an emergency alarm.
Enter numerical data, where applicable.
once. Each click takes you one level up or to the
D-307084 PowerMaster-360R User's Guide
repeatedly
once which