4-3. The Function Description of Live Window
After ActiveX plug-in is installed, you should be able to see the live video from IP camera as
below window.
1
2
3
This section introduces the function buttons of live window. You can test the IP camera function
from your Brower. The button functions are as below:
1. Listen: Click this icon to listen the audio from IP camera when Microphone had installed.
2. Information: This section will show the information of IP camera such as resolution, bit rate and
frame rate.
3. Talk: Click this icon to talk to IP camera when Speaker with audio Amplifier had installed.
4. Photo: Click this icon to take a photo from IP camera. The default path is C:\WebData\snapshot.
5. Rec.: Click this icon to start recording the video clips from IP camera; click again will stop
recording. The default path is C:\WebData\record.
6. Screen: Display video of IP camera on the screen.
4
5
6
7
30
8
9
10
11
12