The Function Description Of Live Window - I-View ANYCAM IR-2MIPM03 Series Operation Manual

4-3. The Function Description of Live Window

After Plug-in is installed, you should be able to see the live video from IP camera as below.
1 2 3 4 5
This section introduces the function buttons of live window. You can test the IP camera function from
your Brower. The button functions are as below:
1. Main /Sub/Third Streaming: You can toggle switch the Main streaming and Sub streaming to
display on the screen.
2. Camera Name: Display the camera which you entry into the firmware of IP Camera.
3. BPS/FPS information: Display current transmit bit rate and frame rate of IP camera on here.
4. Setup: Click this icon to setup the parameters of IP camera
5. Live: Click this icon to display the video of IP camera.
6. File: Click this icon to playback video clips or snapshot from the Hard disk or SD card.
7. Log: Click this icon to search the event view log of IP camera.
8. Time Stamp: Pate the time stamp on the image. You can select the display position.
9. Control Panel: Control Pan/Tile/Zoom, Video parameter, Playback, IR LED and Wiper...etc.
The detail function will description on next page.
10. Logout: Click this icon to log out.
11. Exit: Click this icon to exit the I.E. browser viewing.
6 7 8
Zoom In: Scroll up of Mouse to digital zoom in.
Zoom Out: Scroll down of Mouse to digital zoom out.
27
9 10 11