Table of Contents
Advertisement
Embroidering a Pattern
Embroidering a Pattern
Prepare embroidery thread colors as shown on the app.
Embroidery patterns are embroidered with a change of
thread after each color.
1
Pass the thread through the presser foot hole, and
hold it lightly in your left hand.
Give the thread a little slack.
CAUTION
When embroidering on large garments, place the fabric on
a table so that it does not hang down or extend out.
Otherwise, the embroidery unit cannot move freely and the
embroidery frame may strike the needle, causing the
needle to break and possibly causing injury.
2
Press the "Start/Stop" button to start embroidering.
After 5-6 stitches, press the "Start/Stop" button
again to stop the machine.
26
Make sure to prevent any objects or fabric outside of the
embroidery frame from overlapping the moving area of
the embroidery frame. If the embroidery frame hits
another object, the pattern may become misaligned.
3
Trim the excess thread at the end of the seam.
If the thread is left at the beginning of the stitching, it
may be embroidered over as you continue embroidering
the pattern, making it very difficult to remove the excess
thread after the pattern is finished. Trim the thread at the
beginning.
4
Press the "Start/Stop" button to start embroidering.
Stitching stops automatically with reinforcement and
thread cutting after one color has been completed.
Advertisement
Table of Contents
