Net Mgt Port - Oracle SPARC T8-4 Installation Manual

Pin Signal Description
1 Request to Send
2 Data Terminal Ready
3 Transmit Data
4 Ground
Related Information
"Server Overview" on page 12
■
"Front Panel Components" on page 14
■
"Rear Panel Components" on page 15
■
"Cabling Requirements" on page 51
■
"Connect the SER MGT Cable" on page 59
■
"Connect a Terminal or Emulator to the SER MGT Port" on page 67
■

NET MGT Port

The NET MGT RJ-45 port, located on the rear panel, provides an optional Ethernet connection
to the SP. The NET MGT port is an optional connection to the Oracle ILOM SP. The SP NET
MGT port uses an RJ-45 cable for a 10GBASE-T connection. If your network does not use a
DHCP server, this port will not be available until you configure network settings through the
SER MGT port. See "Rear Panel Components" on page
Pin Signal Description
5 Ground
6 Receive Data
7 Data Set Ready
8 Clear to Send
15.
Identifying Ports
Connecting Cables 55