Tcp-Ip With Gprs Backup Configuration - Ingenico iCT2 Series Operating Manual

2017 paymark software
Hide thumbs Also See for iCT2 Series:
Table of Contents

Advertisement

SKYZER TECHNOLOGIES
8.0
HOST PHONE NO?
08797
9.0
USE DNS Y/N
1-YES 2-NO
10.0
GPRS Primary
HOST DNS
gprs.paymark.co.nz
11.0
GPRS Secondary
Host DNS
gprs2.paymark.co.nz
12.0
USE DNS Y/N
2-NO
13.0
GPRS Primary
HOST IP ADDRESS
117.120.35.3
14.0
GPRS Secondary
HOST IP ADDRESS
117.120.33.3
15.0
SAVE CONFIG Y/N
16.0
START GPRS Y/N

4.1.6 TCP-IP with GPRS Backup Configuration

1.0
SELECT SERVICE
PROVIDER
1-PAYMARK
2-Vodafone
3-Black and White
4-2 Degrees
5-Spark
6-Kore Wireless
7- Global M2M
8-
2.0
GPRS USER NAME?
INGENICO ICT2XX 2017 PAYMARK SOFTWARE OPERATING GUIDE
This parameter specifies the phone number of Paymark network to dial to. By
default, the host phone number is set as 08797. Press ENTER.
NOTE: If the merchant has the Toll Bar on the site, then key in this phone
number 1797 to obtain connectivity to Paymark network.
Press the corresponding number key and press ENTER to set for DNS or IP
Option 1 – to allow the terminal to use Paymark DNS address. Option 1 is
selected by default.
This parameter specifies the Paymark Primary DNS address. By default, it is set to
grps.paymark.co.nz. Press ENTER
This parameter specifies the Paymark Secondary DNS address. By default, it is set
to gprs2.paymark.co.nz. Press ENTER
Option 2 – to allow the terminal to use Paymark IP address.
This parameter specifies the GPRS Primary IP address. By default, it is set to
117.120.35.3. Press ENTER.
This parameter specifies the GPRS Secondary IP Address. By default, it is set to
117.120.33.3. Press ENTER.
Terminal prompts to save configuration. Press ENTER to save configuration on the
terminal or CLEAR to exit and return to idle screen.
Terminal prompts to start GPRS link. Press ENTER to start GPRS or CLEAR to exit
without starting GPRS link to Paymark.
This parameter specifies the GPRS service Provider. By default 1 is selected for
Paymark SIM card. Press ENTER.
These options are pre-configured and automatically configure the terminal to
different SIM providers.
Option 8- Allows you to manually configure the APN
This parameter specifies the GPRS USERNAME. By default this field will be blank.
Press ENTER.
PAGE 37 OF 146
VERSION 1.0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ict250

Table of Contents