Table of Contents
Advertisement
SKYZER TECHNOLOGIES
13.0
ALERT DECLINE
ON
14.0
INTERFACED
OFF
15.0
SWIPE START
ON
INGENICO ICT2XX 2017 PAYMARK SOFTWARE OPERATING GUIDE
Press F1 to enable or disable the ALERT DECLINE function followed by ENTER.
Press F1 to enable or disable the INTERFACED function followed by ENTER.
NOTE: Reseller's are no longer required to contact Skyzer Technologies to obtain
SKYLink interface License key.
Press F1 to enable or disable the SWIPE START function followed by ENTER.
NOTE: This swipe start function allows the merchant to deactivate the swipe start
from the idle screen. This feature will apply in the environment of Contactless or
Interface. For example, if the EFTPOS terminal is interfaced to a POS system, the
swipe start function can be enabled to restrict the cardholders swiping their card
before the EFTPOS terminal has received the transaction from POS system.
When the interface link or contactless is enabled on the terminal, the
swipe start function will automatically be deactivated and vice-versa.
PAGE 58 OF 146
VERSION 1.0
Advertisement
Table of Contents
