Ingenico iCT2 Series Operating Manual page 41

2017 paymark software
Hide thumbs Also See for iCT2 Series:
Table of Contents

Advertisement

SKYZER TECHNOLOGIES
14.0
HOST PHONE NO?
08797
15.0
USE DNS Y/N
1-YES 2-NO
16.0
IP Primary
HOST DNS
direct.paymark.co.nz
17.0
IP Secondary
Host DNS
direct2.paymark.co.n
18.0
GPRS Primary
HOST DNS
gprs.paymark.co.nz
19.0
GPRS Secondary
Host DNS
gprs2.paymark.co.nz
20.0
START TCP-IP Y/N
21.0
START GPRS Y/N
INGENICO ICT2XX 2017 PAYMARK SOFTWARE OPERATING GUIDE
This parameter specifies the phone number of Paymark network to dial to. By
default, the host phone number is set as 08797. Press ENTER.
NOTE: If the merchant has the Toll Bar on the site, then key in this phone
number 1797 to obtain connectivity to Paymark network.
Press the corresponding number key and press ENTER to set for DNS or IP
Option 1 – to allow the terminal to use Paymarks DNS address. Option 1 is
selected by default.
This parameter specifies the Paymark IP Primary DNS address. By default, it is set
to direct.paymark.co.nz. Press ENTER
This parameter specifies the Paymark IP Secondary DNS address. By default, it is
set to direct2.paymark.co.nz. Press ENTER
This parameter specifies the Paymark GPRS Primary DNS address. By default, it is
set to grps.paymark.co.nz. Press ENTER
This parameter specifies the Paymark GPRS Secondary DNS address. By default, it is
set to gprs2.paymark.co.nz. Press ENTER
Terminal prompts to start TCP-IP link. Press ENTER to start the link or CLEAR to
exit without starting.
Terminal prompts to start GPRS link. Press ENTER to start GPRS or CLEAR to exit
without starting GPRS link to Paymark.
PAGE 41 OF 146
VERSION 1.0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ict250

Table of Contents