Ingenico iCT2 Series Operating Manual page 87

2017 paymark software
Hide thumbs Also See for iCT2 Series:
Table of Contents

Advertisement

SKYZER TECHNOLOGIES
12.0
SIGNATURE OK? Y/N
ENTER=YES,CLR=NO
13.0
SIG ACCEPTED
14.0
SIG DECLINED
INGENICO ICT2XX 2017 PAYMARK SOFTWARE OPERATING GUIDE
Verify the cardholder's signature with the signature on the back of the card. If the
signature matches:
Press ENTER to accept and proceed with step 13.0
If not, press CLEAR to decline and proceed with step 14.0
SIG ACCEPTED will be displayed on both terminal and contactless screen. The
merchant presses the ENTER key to accept the cardholder's signature after
signature matches with the card.
SIG DECLINED will be displayed on both terminal and contactless screen. The
merchant presses the CLEAR key to decline the cardholder's signature after
signature fails to match with the card.
PAGE 87 OF 146
VERSION 1.0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ict250

Table of Contents