Credit Card Tipping Transaction - Ingenico iCT2 Series Operating Manual

2017 paymark software
Hide thumbs Also See for iCT2 Series:
Table of Contents

Advertisement

SKYZER TECHNOLOGIES
For PIN Entry Transaction
10.0
PIN OR ENTER
****
11.0
PROCESSING NOW
12.0
REMOVE CARD
13.0
ACCEPTED
14.0
DECLINED
For Signature Transaction
NOTE: If the cardholder cannot remember their PIN or does not have a PIN, then the merchant has the option to accept
a signature transaction.
Complete steps 1-6 of the transaction process first
15.0
PIN OR ENTER
16.0
PROCESSING NOW
17.0
REMOVE CARD
18.0
SIGN RECEIPT
19.0
SIGNATURE OK? Y/N
ENTER=YES,CLR=NO
20.0
SIG ACCEPTED
21.0
SIG DECLINED

11.9 CREDIT CARD TIPPING TRANSACTION

This function allows the merchant to add a TIP amount to a credit card
transaction.
INGENICO ICT2XX 2017 PAYMARK SOFTWARE OPERATING GUIDE
The cardholder to keys in their PIN number followed by ENTER.
PROCESSING NOW will be displayed on the terminal and pinpad.
Remove card from the chip card reader.
NOTE: If no action is taken within 7 seconds, the terminal will proceed with
printing of the receipts and REMOVE CARD prompt will display again.
Transaction has been ACCEPTED with PIN entry and transaction receipt is printed.
Transaction has been DECLINED with PIN entry and transaction receipt is printed.
The cardholder to press ENTER on the pinpad to proceed with a Signature
transaction.
PROCESSING NOW will be displayed on the terminal and pinpad.
Remove card from the chip card reader.
NOTE: If no action is taken within 7 seconds, the terminal will proceed with
printing of the receipts and REMOVE CARD prompt will display again.
SIGN RECEIPT will be displayed on both terminal and pinpad screen. Tear the
receipt off and ask the cardholder to sign receipt.
Verify the cardholder's signature with the signature on the back of the card. If the
signature matches:
Press ENTER to accept and proceed with step 19.0
If not, press CLEAR to decline and proceed with step 20.0
SIG ACCEPTED will be displayed on both the terminal and pinpad screen.
SIG DECLINED will be displayed on both the terminal and pinpad screen.
PAGE 97 OF 146
VERSION 1.0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ict250

Table of Contents