W I -F I Antenna Installation (Wireless Model Only ); Figure 3-3: Hdd Retention Screws - IEI Technology ECN-360A-HM65 User Manual

ECN-360A-HM65 Em b e d d e d S ys te m
S te p 3: Attach the HDD to the HDD bracket, and then slide the HDD to connect the HDD
to the SATA connector. Secure the HDD with the HDD bracket by four retention
screws (Figure 3-3).

Figure 3-3: HDD Retention Screws

Replace the HDD cover and secure it using six previously removed retention
S te p 4:
screws.
3.4 Wi-Fi An te n n a In s ta lla tio n (Wire le s s Mo d e l On ly)
To install the Wi-Fi antennas to the ECN-360A-HM65 series for efficient wireless network
transmission, follow the steps below.
Locate the antenna connectors on the rear panel of the embedded system.
S te p 1:
S te p 2: Install the antennas to the antenna connectors (Figure 3-4).
P a g e 15