Yamaha RS7000 Owner's Manual page 327

G Sequencer block (Sequencer Part)
(1) TRANSMIT FLOW
MIDI OUT [SW1] [SW3] CHANNEL VOICE
(A, B) MESSAGE
NOTE ON/OFF
POLYPHONIC KEY
PRESSURE
CONTROL CHANGE
PROGRAM CHANGE
CHANNEL PRESSURE
PITCH BEND CHANGE
[SW3] CHANNEL MODE
MESSAGE
ALL SOUND OFF
RESET ALL CON-
TROLLERS
LOCAL CONTROL
OMNI MODE OFF
OMNI MODE ON
MONO MODE ON
POLY MODE ON
[SW5] TIMING CLOCK
[SW2] SYSTEM REALTIME
MESSAGE
START
CONTINUE
STOP
SYSTEM COMMON
MESSAGE
SONG POSITION
POINTER
SONG SELECT
[SW3] SYSTEM EXCLUSIVE
MESSAGE
[SW2] [SW4] MIDI MACHINE
CONTROL
STOP
DEFERRED PLAY
LOCATE
[SW1] Out Select and Out Channel
The SETUP parameter Out Channel allows the output connector and MIDI transmit
channel to be specified for each track.
[SW2] MIDI Control Out
The UTILITY parameter Control allows transmission to be turned on/off and the
output connector to be specified.
[SW3] MIDI Output Filter
The UTILITY parameter MIDI Filter allows transmission to be turned on/off.
[SW4] MIDI Sync
Transmitted when UTILITY MIDI Sync is set to MTC.
[SW5] MIDI Clock Out
The UTILITY parameter MIDI Clock out allows transmission to be turned on/off
and the output connector to be specified.
(2) RECEIVE FLOW
9nH
AnH
BnH
CnH
DnH
EnH
BnH 78H
BnH 79H
BnH 7AH
BnH 7CH
BnH 7DH
BnH 7EH
BnH 7FH
F8H
FAH
FBH
FCH
F2H
F3H
F0H ........ F7H
F0H 7FH 7FH 06H 01H F7H
F0H 7FH 7FH 06H 03H F7H
F0H 7FH 7FH 06H 44H 06H 01H hrH
mnH scH frH ffH F7H
[SW1]
[SW2]
[SW3]
MIDI IN [SW1] CHANNEL VOICE
MESSAGE
NOTE OFF
NOTE ON/OFF
POLYPHONIC KEY
PRESSURE
CONTROL CHANGE
PROGRAM CHANGE
CHANNEL PRESSURE
PITCH BEND CHANGE
CHANNEL MODE
MESSAGE
ALL SOUND OFF
RESET ALL
CONTROLLERS
LOCAL CONTROL
OMNI MODE OFF
OMNI MODE ON
MONO MODE ON
POLY MODE ON
SYSTEM EXCLUSIVE
MESSAGE
[SW3] TIMING CLOCK
[SW3] MTC QUARTER FRAME
MESSAGE
[SW2] SYSTEM REALTIME
MESSAGE
START
CONTINUE
STOP
SYSTEM COMMON
MESSAGE
SONG POSITION
POINTER
SONG SELECT
SYSTEM EXCLUSIVE
MESSAGE
SECTION CONTROL
MIDI Input Filter
The UTILITY parameter MIDI Filter allows reception to be turned on/off.
MIDI Control In
The UTILITY parameter MIDI Control allows reception to be turned on/off.
MIDI Sync
Timing Clock is received when the UTILITY parameter MIDI Sync = MIDI, and
MTC is received when MIDI Sync = MTC.
11. MIDI Data Format
8nH
9nH
AnH
BnH
CnH
DnH
EnH
BnH 78H
BnH 79H
BnH 7AH
BnH 7CH
BnH 7DH
BnH 7EH
BnH 7FH
F0H ........ F7H
F8H
F1H
FAH
FBH
FCH
F2H
F3H
F0H 43H 7EH 00H ssH ddH F7H
RS7000 327