Yamaha RS7000 Owner's Manual page 127

Press [F4] to execute the load operation.
7.
If the destination style or sample voice already contains data
the "Are You Sure? No[F2]/Yes[F3]" confirmation prompt
will appear.
The confirmation prompt will always appear when the "ALL"
file type is selected.
Press [F3] if it is OK to overwrite the corresponding memory
contents.
Press [F2] to abort the load operation and return to the status
of the RS7000 prior to pressing the [F1] button.
Press [EXIT] to return to the PATTERN Play or Patch mode.
8.
NOTE
When the LOAD service is a SCSI disk it is neces-
sary to select the appropriate SCSI ID and parti-
tion in the SCSI Setup page.
Display Parameters
CARD or DISK = CARD
2 1
[F1] [Knob 2]
CARD or DISK = SCSI
Partition Name
SCSI ID
Disk Type Icon
2 1
[F1] [Knob 2]
1 FILE TYPE
[Settings] PATT, ALL, ALL+SYSTEM, SMPL
[PATTERN] → [LOAD]
Specifies the type of data file to be loaded.
For details about the various file types see "About File
Types" on page 116.
SCSI/CARD
2
[Settings] SCSI, CARD
3
[F4]
Selects the disk or card from which the data is to be loaded.
When CARD is selected and a properly formatted memory
card is in the card slot, a memory card icon will appear along
with the available memory on the card.
When SCSI is selected and a properly formatted disk is con-
nected to the SCSI connector, a disk icon will appear along
with the disk description, SCSI ID number, and partition
name.
OK
3
Switches to the load execution page.
3
[F4]
I Load Execution Page
13. Loading from Memory Card or Disk
............................................................. [Knob 2]
PATT (Pattern)
............... A single style is loaded into the
specified style number in the
internal memory from a PATT
type (.R2P) or ALL type (.R2A) file.
ALL .................An ALL type (.R2A) file is loaded
and all internal memory except the
system setup data is overwritten.
ALL+SYSTEM
............... An ALL type (.R2A) file is loaded
and all internal memory including
the system setup data is overwrit-
ten.
SMPL .............. A specified sample from multiple
sample voices included in a PATT
(.R2P), SONG (.RS2), or ALL (.R2A)
type file can be loaded to the speci-
fied sample voice number.
.................................................................. [F1]
SCSI .............. The hard disk, ZIP disk, or other
SCSI disk connected to the SCSI
connector.
CARD ............ A memory card inserted in the
card slot.
..................................................................................... [F4]
[PATTERN] → [LOAD] → [F4]
2
RS7000 127