Yamaha RS7000 Owner's Manual page 155

1 TR (Track Number)
[Settings] TR01 ~ 16
Selects the track to which the phrase to be edited is assigned.
Select the track by using the keyboard keys while holding the
[TRACK SELECT] button.
For details on track selection refer to "Chapter 1: Basics",
page 67.
2 View Filter Icon
Indicates that the View Filter is set so that certain event types
are not displayed.
View Filter settings are made via the View Filter display
page (Page 156).
Measure, Beat, and Clock
3
[Settings] Measure 001 ~ 256
Beat 1 ~ 16 (depends on meter)
Clock 000 ~ 479 (depends on meter)
Indicates the location of the corresponding event. Changing
any of these values changes the location of the even accord-
ingly.
Event and Parameters
4
[Settings]
Events (sequence tracks)
: Note
: PB (Pitch Bend)
: PC (Program Change)
: CC (Control Change)
: CAT (Channel Aftertouch)
: PAT (Polyphonic Aftertouch)
: RPN
: NRPN
: SEXC (System Exclusive)
Parameters
Depends on the event type.
Displays the type of each event.
For details about the event type and their parameters refer to
"Chapter 7: Other Information", page 263.
NOTE
"TOP" and "END" are displayed at the begin-
ning and end of the data, respectively. "TOP"
and "END" are not phrase data and cannot be
edited.
↑ ↓ (Cursor ↑ and ↓)
5
..........................................[Knob 1]
Moves the cursor up or down the event list to select an event
for editing.
← → (Cursor ← and →)
6
Moves the cursor left or right to select the parameter to be
edited for the current event.
...................................[Knob 2]
7 DELETE
.......................................................................... [F2]
Deletes the currently selected event.
INSERT
8
........................................................................... [F3]
Inserts a new event.
VALUE
9
.................................................................... [Knob 4]
Adjusts the value of the selected parameter.
When the entire event line is flashing after operating [Knob
4], the value can be directly entered by holding the [SHIFT]
and [F4] buttons and using the SUB MODE buttons as a
numeric keypad.
Insert Page
Press [F3] from the phrase EDIT page to access this page.
2
1 4
[Knob 2]
Event
1
[Settings]
Events (sequence tracks)
: Note
: PB (Pitch Bend)
: PC (Program Change)
: CC (Control Change)
: CAT (Channel Aftertouch)
: PAT (Polyphonic Aftertouch)
: RPN
: NRPN
: SEXC (System Exclusive)
Selects the type of event to be inserted.
For details about the event type and their parameters refer to
"Chapter 7: Other Information", page 263.
2 Measure, Beat, and Clock
[Settings] Measure 001 ~ 256
Beat 1 ~ 16 (depends on meter)
Clock 000 ~ 479 (depends on meter)
Specifies the location at which the new event will be inserted.
3 Parameter
The value for selected event. The available parameter(s)
depends on the type of event selected.
15. Phrase Editing
3
5 6
[F3] [Knob 4]
RS7000 155
2