Yamaha RS7000 Owner's Manual page 172

6. The Pattern Chain Jobs
00 Undo/Redo
The Undo job cancels the changes made by the most recent oper-
ation (job, edit, recording), restoring the data to its previous state.
The Redo job cancels Undo and restore the changes.
Undo/Redo can also be executed by pressing [SHIFT]+[JOB] in
display pages such as the Play screen.
NOTE
Undo/Redo does not work with sample voice
operations.
2
Undo/Redo Indication
1
"Undo" or "Redo" appears on the display to indicate the job
that is currently available. Undo and Redo are selected alter-
nately.
2 Undo/Redo target
Identifies the operation currently available for undoing or
redoing.
If the specified Undo/Redo target is not in memory, "Undo
Impossible!" will appear and the Undo/Redo function cannot
be executed.
01 Copy Event
This job copies all data from a specified source range to a speci-
fied destination location.
CAUTION
When Copy Event is executed any data already
existing at the Destination location will be over-
written.
172 RS7000
1
[F4]
1
2
[Knob 2]
Source Range
1
[Settings] Measures 001 ~ 999
Specify the source range from which the data will be copied.
2 Destination Location
[Settings] Measures 001 ~ 999
Specifies the location to which the data will be copied.
Times
3
[Settings] 01 ~ 99
Specifies the number of times the data is copied.
02 Erase Event
This job clears all data from the specified range.
1
[Knob 2]
Range
1
[Settings] Measures 001 ~ 999
Sets the range of measures over which the job will be applied.
3
[Knob 3] [F4]
[Knob 3] [F4]