13. The Song Jobs
EXC (System exclusive)
ALL (All events)
When Track is BPM:
Event Type
BPM (Tempo)
When Track is SCENE:
Event Type
ScnM (Scene Memory)
MutM (Mute Memory)
TrMt (Track Mute)
13 Extract Event
This job moves all instances of specified event data from a speci-
fied range of a track to the same range in a different track.
NOTE
If this job is applied to a track that uses sample voices,
the sample voices will not be moved to the destination
track but the note data that triggers them will, with the
result that the samples will no longer sound. To make
the sample sound, use the MIXER sub mode (Page
194) to assign the appropriate sample voice to the
destination track.
Details are the same as the PATTERN mode (Page 142).
1
4
Source Track
1
[Settings] 01 ~ 16
Selects the track from which events are to be extracted.
Source Range
2
[Settings]
Measure:Beat:Clock
001:1:000 ~ 999:16:479
4
Destination Track
[Settings] 01 ~ 16
218 RS7000
................ —
............................ —
Range
................................ —
Range
................... —
..................... —
.......................... —
2
3
[Knob 2]
[Knob 3]
I The following parameters are the same as in the
PATTERN mode (Page 142).
Event
3
14 Create Continuous Data
Creates continuous pitch bend or control change data over the
specified range.
Details are the same as the PATTERN mode (Page 142).
Track
1
[Settings] 01 ~ 16, BPM, ALL
Range
2
[Settings]
Measure:Beat:Clock
001:1:000 ~ 999:16:479
Event Type
3
[Settings]
When Track is 01 ~ 16:
Event Type
PB (Pitch bend)
CC (Control change) ........................ 000 ~ 127, ALL
[F4]
CAT (Channel aftertouch)
EXC (System exclusive)
When Track is BPM:
Event Type
BPM (Tempo)
Data
5
[Settings] 000 ~ 127
I The following parameters are the same as in the
PATTERN mode (Page 142).
4
Times
Clock
6
1 5
6
2
[Knob 2]
[Knob 3]
............................. —
.............. —
................ —
................................ —
(-8192 ... +8191 for pitch bend data,
1.0 ~ 300.0 for BPM data)
3
4
7
[F4]
Range
Range