Yamaha RS7000 Owner's Manual page 14

The Controls & Connectors
[SWING/VELOCITY] Knob
With the initial default settings, this knob provides real-
time control of the PLAY FX SWING and VELOCITY
parameters.
SWING adjusts the timing of the 8th-note up (back) beats
to create a bounce or swing feel (Page 89). VELOCITY
adjusts the velocity of the notes (Page 88).
[SELECT] Button
Selects one of the two functions/parameters assigned to
each knob. The indicator next to the currently selected
parameters will light.
[EFFECT SEND/VOLUME] Knobs
9
In addition to the functions described here, these knobs are
fully assignable and can be set up to control a wide range
of functions and parameters.
Since the knobs allow continuous parameter control for the
selected track, they can be used for creative real-time per-
formance sound control.
The default assignments for these knobs are the main
MIXER parameters. Refer to "Chapter 2: The Pattern
mode", page 69, for more information on the MIXER
parameters.
[DRY VARI] Knob
EFFECT SEND / VOLUME
DRY VARI DELAY/CHO
[DELAY/CHO] Knob
[DRY VARI] Knob (Page 96)
With the initial default settings, this knob provides real-
time control of the MIXER DRY SEND LEVEL parame-
ter. This adjusts the level of the signal sent to the dry line.
[DELAY/CHO] Knob (Page 96)
With the initial default settings, this knob provides real-
time control of the MIXER DELAY/CHORUS SEND
LEVEL parameter. This adjusts the level of the signal sent
to the delay or chorus effect.
[REVERB] Knob (Page 96)
With the initial default settings, this knob provides real-
time control of the MIXER REVERB SEND LEVEL
parameter. This adjusts the level of the signal sent to the
reverb effect.
[TRACK VOLUME] Knob (Page 94)
With the initial default settings, this knob provides real-
time control of the volume of the currently selected track.
14 RS7000
[REVERB] Knob
REVERB TRACK VOLUME
[TRACK VOLUME] Knob
LFO Knobs
0
In addition to the functions described here, these knobs are
fully assignable and can be set up to control a wide range
of functions and parameters.
Since the knobs allow continuous parameter control for the
selected track, they can be used for creative real-time per-
formance sound control. 3 functions can be assigned to the
[DEPTH] knob, selected by the [AMP/FILTER/PITCH] but-
ton B to its right.
The default assignments for these knobs are the main LFO
parameters.
[WAVE] Button
LFO
WAVE
USER
SPEED
[SPEED] Knob
[SPEED] Knob (Page 98)
With the initial default settings, this knob provides real-
time control of the LFO SPEED parameter.
[DEPTH] Knob (Page 98)
With the initial default settings, this knob provides real-
time control of the LFO DEPTH parameter. Depending on
the function selected by the [AMP/FILTER/PITCH] but-
ton B, the [DEPTH] knob can control the depth of a trem-
olo, wow, or vibrato effect.
[WAVE] Button (Page 98)
Selects the LFO waveform.
[EG] Knobs
A
In addition to the functions described here, these knobs are
fully assignable and can be set up to control a wide range
of functions and parameters.
3 parameters are assigned to each knob, selectable via the
[AMP/FILTER/PITCH] button B.
Since the knobs allow continuous parameter control for the
selected track, they can be used for creative real-time per-
formance sound control.
The default assignments for these knobs are the main
MIXER parameters. Refer to "Chapter 2: The Pattern
mode", page 69, for more information on the MIXER
parameters.
[ATTACK] Knob
EG
ATTACK DECAY
[DECAY] Knob
S&H
DEPTH
PGM
[DEPTH] Knob
[SUSTAIN] Knob
SUSTAIN RELEASE
[RELEASE] Knob