Yamaha RS7000 Owner's Manual page 121

Display Parameters
FILE TYPE = WAV, sample kit voice selected
Sample
Sample
Name
Number
1 5 2
[Knob 1]
[F1] [Knob 2]
FILE TYPE = WAV, pitched sample voice selected
Sample Sample
Number Name
5
1 2
[F1]
[Knob 1] [Knob 2]
FILE TYPE = SMF
Style Name
Style Number
1 5
[Knob 1] [F1]
FILE TYPE
1
..............................................................[Knob 1]
[Settings] WAV, SMF
Specifies the type of data file to be exported.
For descriptions of the various file types see "About File
Types" on page 116.
Copy-protected sample files cannot be exported as WAV
files. See "Notes on musical copyright" (Page 21).
TRACK
2
.....................................................................[Knob 2]
[Settings] 01 ~ 16
Selects the track that uses the sample to be exported.
When the sample used by the selected track is a sample voice,
the number and name of the sample will appear on the dis-
play.
[PATTERN] → [SAVE] × 2
Available Space Icon
3 4
[F4]
[Knob 3]
Available Space Icon
3 4
[Knob 3] [F4]
Available Space
Section
Icon
4
[F4]
12. Saving to Memory Card or Disk
3 NOTE
....................................................................... [Knob 3]
[Settings] C-2 ~ G8
When the sample used by the selected track is a sample kit
voice, this parameter selects the note to which the sample to
be exported is assigned.
When the sample used by the selected track is a sample voice,
the number and name of the sample will appear on the dis-
play.
4 SCSI/CARD
................................................................... [F4]
[Settings] SCSI, CARD
SCSI .............. The hard disk, ZIP disk, or other
SCSI disk connected to the SCSI
connector.
CARD ............ A memory card inserted in the
card slot.
Selects the disk or card to which the data is to be exported.
When CARD is selected and a properly formatted memory
card is in the card slot, a memory card icon will appear along
with the available memory on the card.
When SCSI is selected and a properly formatted disk is con-
nected to the SCSI connector, a disk icon will appear along
with the disk description, SCSI ID number, partition name,
and amount of available space in the partition.
5 OK
..................................................................................... [F1]
Switches to the export execution page.
I Export Execution Page
[PATTERN] → [SAVE] × 2 → [F1]
6 A 8
[Knob 1] [F2]
FILE NAME
6
........................................................... [Knob 1]
Moves the cursor for file-name entry.
Use [Knob 1] to move the cursor to the desired character
position, then use the keyboard to enter the desired character.
Refer to "Chapter 1: Basics", page 67, for character-entry
details.
NOTE
File names can be a maximum of 8 characters
in length (not including the extension). Further,
the file extension cannot be changed.
Characters which cannot be used in file names
are automatically converted to "_".
7 9 0
[Knob 3]
RS7000 121
2