Yamaha RS7000 Owner's Manual page 130

13. Loading from Memory Card or Disk
Specifies the type of data file to be imported.
Some imported samples may play at an unexpected pitch,
loop playback may change, or the sound quality may vary.
Voice edit and effect settings will not be reproduced when an
RM1x PATT file is imported. Voices may also change. Fur-
thermore, sequence data in tracks which use preset phrases
cannot be reproduced. For details about the various file types
see "About File Types" on page 116.
2 SCSI/CARD
....................................................................[F1]
[Settings] SCSI, CARD
SCSI .............. The hard disk, ZIP disk, or other
CARD ............ A memory card inserted in the
Selects the disk or card from which the data is to be imported.
When CARD is selected and a properly formatted memory
card is in the card slot, a memory card icon will appear along
with the available memory on the card.
When SCSI is selected and a properly formatted disk is con-
nected to the SCSI connector, a disk icon will appear along
with the disk description, SCSI ID number, and partition
name.
OK
3
......................................................................................[F4]
Switches to the import execution page.
I Import Execution Page
FILE TYPE = SAMPLE
4 7
[F1]
[Knob 1]
FILE TYPE = SMF, RM1x PATT
4
[Knob 1]
130 RS7000
SCSI disk connected to the SCSI
connector.
card slot.
[PATTERN] → [LOAD] × 2 → [F4]
Sample Voice Number
8 5 9
[F2] [Knob 3] [F4]
Section
Style Number
8
Pattern Name
[F2]
File Select
4
Selects the file to be imported.
Only files matching the selected file type are shown in the
list.
If the file to be loaded is inside a folder, Use [F1] (
[F2] (OPEN) to move to the folder containing the file.
TRACK
5
.................................................................... [Knob 3]
[Settings] 01 ~ 16
Selects the track to which the data will be imported when the
FILE TYPE is SAMPLE.
TYPE
6
........................................................................ [Knob 4]
[Settings] PITCHED, KIT: C-2 ~ G8
Selects the sample voice to be imported when the file type is
set to SAMPLE.
The available settings will depend on the type of sample
voice assigned to the selected track.
G When a pitched sample is assigned to the selected
track.
Two choices will be available: PITCHED SAMPLE and
SAMPLE KIT. When SAMPLE KIT is selected you will also
need to specify a note name.
"REPLACE" will appear on the display, and the existing data
will be overwritten when the data is imported.
G When a sample kit is assigned to the selected track.
The sample voice type cannot be changed. You will need to
specify the note name to which the data will be loaded.
If the specified note name is empty, "EMPTY" will appear on
the display.
If a sample voice is assigned to the specified note name,
"REPLACE" will appear on the display and the existing data
will be overwritten.
G When a sample voice is assigned to the selected
track.
Two choices will be available: PITCHED SAMPLE and
SAMPLE KIT. When SAMPLE KIT is selected you will also
need to specify a note name.
"EMPTY" will appear on the display, and the number of the
6
newly created sample voice will be displayed.
[Knob 4]
(UP)
7
.......................................................................... [F1]
Moves to the next highest folder in the folder hierarchy.
OPEN
8
............................................................................... [F2]
Opens the selected folder, moving down one level in the
folder hierarchy.
............................................................ [Knob 1]
) and