Yamaha RS7000 Owner's Manual page 122

12. Saving to Memory Card or Disk
Folder Select
7
........................................................[Knob 3]
Selects the folder to which the file will be saved.
To export to the currently selected folder, select "Current" at
the top of the list.
NEW
8
..................................................................................[F2]
Creates a new folder.
The folder-name entry display will appear.
[Knob 2]
This page allows entry of file names up to 8 characters in
length.
[Knob 2] moves the cursor to the desired character position.
The keyboard is used to enter a character at the cursor posi-
tion.
Refer to "Chapter 1: Basics", page 67, for character-entry
details.
Press [F4] to create a folder and return to the export execu-
tion page.
Press [F3] to abort folder creation and return to the export
execution page.
9 (UP)
...........................................................................[F3]
Moves to the next highest folder in the folder hierarchy.
OPEN
0
................................................................................[F4]
Opens the selected folder, moving down one level in the
folder hierarchy.
EXPORT
A
..........................................................................[F1]
When "CurrentDir" is selected, the file is saved to the cur-
rently selected folder.
Changes the name of a file or folder.
NOTE
When the target rename media is a SCSI disk,
files and folders on DOS-formatted disks can be
renamed.
122 RS7000
[F3] [F4]
[3] Rename Page
Rename Procedure
Press the [SAVE] button 3 times from the PATTERN Play or
1.
Patch mode to go to the Rename page.
Press [F1] (CARD/SCSI) to specify whether you want to
2.
rename a file on a memory card or disk.
Use [F2]( ) and [F3] (OPEN) to select a folder.
3.
Use [Knob 2] to select the folder and file to be renamed.
4.
Press [F4] (RENAME) to go to the name-entry dialog page.
5.
Use [Knob 2] (FILE NAME) and the keyboard to enter a file
6.
name.
Press [F4] to execute the rename operation and close the
7.
rename dialog display.
Press [EXIT] 3 times to return to the PATTERN Play or Patch
8.
mode.
Display Parameters
2 1
[Knob 2]
[F1]
FILE
1
.......................................................................... [Knob 2]
The file or folder to be renamed.
NOTE
This function can be used to change the name
of any file or folder on a memory card or disk.
SCSI/CARD
2
................................................................... [F1]
[Settings] SCSI, CARD
SCSI .............. The hard disk, ZIP disk, or other
SCSI disk connected to the SCSI
connector.
CARD ............ A memory card inserted in the
card slot.
Selects the disk or memory card containing the file or folder
to be renamed.
[PATTERN] → [SAVE] × 3
3 4 5
[F2] [F3]
[F4]