Yamaha RS7000 Owner's Manual page 253

2 KEY (Key Number)
............................................[Knob 2]
[Settings] C-2 ~ G8
Specifies the key number of the sample to be sliced.
NOTE
This parameter is not available when the speci-
fied sample is a Pitched Voice.
3 AUDITION
.......................................................................[F2]
Plays the specified sample.
4 DO!
....................................................................................[F4]
Selects the sample to be sliced and moves to the next page.
The Slice Parameter Page
5 6
7 8
[Knob 1]
[Knob 3] [Knob 3]
MEAS (Measure)
5
.................................................[Knob 1]
METER
6
.....................................................................[Knob 1]
7 SUB DIVIDE
...........................................................[Knob 3]
8 SLICE TYPE
..........................................................[Knob 4]
SENS (Slice Sensitivity)
9
0 DO!
For the details of each parameter, refer to the slice page (Page
235) of the sampling mode.
A CREATE
..........................................................................[F3]
If the original sample voice is a pitched voice, it will be saved
at this point by overwriting.
If the original sample voice is a sample kit voice, a page will
appear allowing you to select the track.
0 CREATE TO
A
A 9 =
[F3]
Allows a name to be entered for the selected sample voice.
1
2
3
=
[Knob 2]
............................................................. [Knob 2]
[Settings] TR01 ~ TR16
Specifies the track to which the sliced sample and note data
will be saved.
OK
..................................................................................... [F3]
Saves the sliced sample and note data to the specified desti-
nation track.
NOTE
See page 237 for information on the amount of
free memory required for slice operations.
13 SAMPLE VOICE NAME
1
[Knob 1]
SAMPLE (Sample Number)
[Settings] 001 ~ 128, C001 ~ C128
Specifies the sample voice to be named.
NAME ← →
........................................................... [Knob 3]
Enters a name of up to 8 characters for the sample voice.
Use [Knob 3] to move the cursor, and the keyboard to enter
the corresponding character at the selected character location.
Refer to "Chapter 1: Basics", page 67, for more information
on name entry.
DO!
................................................................................... [F4]
Enters the sample voice name.
4. The Sample Jobs
A
[F3]
2 3
[Knob 3] [F4]
.......................... [Knob 1]
RS7000 253
5