Yamaha RS7000 Owner's Manual page 176

7. Pattern Chain Editing
• Complex time signatures can be created by changing the meter at
appropriate measures. It is also possible to switch sections on
th
every beat (or 8 note or 16
6. If you mistakenly enter data, move the cursor to that location
and press [F3] (CLEAR) to delete the event.
NOTE
Be sure to enter "END" at the end of the chain.
Display Parameters
When the BPM or SCENE/MUTE track is selected
1
2
4 5
[Knob 1] [Knob 2]
When a pattern track is selected
Meter
0
1 Track
[Settings] BPM, SCENE, PATT
BPM .................. BPM (Tempo) track
SCENE.............. Scene/Mute track
PATT................. Pattern track
Selects the track to be edited.
Measure, Beat, and Clock
2
[Settings]
Measure
Beat
Clock
Indicates the location of the corresponding event. Changing
any of these values changes the location of the event accord-
ingly.
176 RS7000
th
note) to create special effects.
Edit Change Page
3
6 7
[F2]
[F3]
[SHIFT]+[F4]
Measure
Style Number Section
9 A B
C
Clear
001 ~ 999
1 ~ 16 (depends on meter)
000 ~ 479 (depends on meter)
Event and Parameters
3
[Settings]
BPM Track
• Tempo Change: 001.0 ~ 300.0 (BPM)
SCENE/MUTE Track
• Scene Memory Number: Scene Memory 1 ~ 5
• Mute Memory Number: Mute Memory 1 ~ 5
• Track Mute: Track Mute
Displays the type of each event.
For details about the event types and their parameters refer to
"Chapter 7: Other Information", page 263.
NOTE
"TOP" and "END" are displayed at the begin-
ning and end of the data, respectively. "TOP"
and "END" are not phrase data and cannot be
edited.
8
↑ ↓ (Cursor ↑ and ↓)
4
[Knob 4]
Moves the cursor up or down the event list to select an event
for editing.
← → (Cursor ← and →)
5
Moves the cursor left or right to select the parameter to be
edited for the current event.
DELETE
6
Deletes the currently selected event.
INSERT
7
Jumps to the Insert page to allow insertion of a new event.
VALUE ...................................[
8
Adjusts the value of the selected parameter.
9 Measure
[Settings] 001 ~ 999
Sets the measure for which the meter, style or section is to be
edited. [Knob 1] can be used to move from measure to mea-
sure.
.............Tempo change events.
.............Recalls a scene memory.
.............Recalls a mute memory.
.............Track mute on/off events. Tracks 1 ~
16 are displayed in order from left to
right. indicates that mute is off;
indicates that mute is on.
....................................... [Knob 1]
................................ [Knob 2]
.......................................................................... [F2]
.......................................................................... [F3]
Knob 4], [SHIFT]+[F4]