Yamaha RS7000 Owner's Manual page 246

Music production studio
Hide thumbs Also See for RS7000:
Table of Contents

Advertisement

4. The Sample Jobs
Deletes the specified sample or sample voice.
1
2
[Knob 1] [Knob 2]
1
SAMPLE (Sample Number)
[Settings] 001 ~ 128, C001 ~ C128
Specifies the sample voice to be deleted.
2
KEY (Key Number)
[Settings] C-2 ~ G8, ALL
Specifies the key number of the sample(s) to be deleted.
When ALL is selected the entire sample voice is deleted.
NOTE
• This parameter is not available when the
specified sample is a Pitched Voice.
• When the last remaining sample in a Sample
Kit Voice is deleted, the entire sample voice is
deleted.
AUDITION
3
.......................................................................[F2]
Plays the specified sample.
4
DO!
....................................................................................[F4]
Executes the job.
03 EXTRACT
Deletes the portions of the sample prior to the specified start
point and after the specified end point.
NOTE
• Refer to the Trim page for information about
the start and end points(Page 241).
• When the play mode is ATK + LOOP data
outside the start (attack) point and end point
region will be deleted.
246 RS7000
02 DELETE
3
4
[F2]
[F4]
...........................[Knob 1]
............................................[Knob 2]
1
2
[Knob 1]
[F2]
[Knob 2]
1
SAMPLE (Sample Number)
[Settings] 001 ~ 128, C001 ~ C128
Specifies the sample voice to which the extract job is to be
applied.
KEY (Key Number)
2
........................................... [Knob 2]
[Settings] C-2 ~ G8, ALL
Specifies the key number of the sample(s) to which the
extract job is to be applied.
When ALL is selected the extract job is applied to the entire
sample voice.
NOTE
This parameter is not available when the speci-
fied sample is a Pitched Voice.
AUDITION
3
...................................................................... [F2]
Plays the specified sample.
4
DO!
................................................................................... [F4]
Executes the job.
04 MOVE
Moves the specified sample to a different sample or sample voice
number.
NOTE
• This job provides a convenient way to collect
samples into a Sample Kit Voice from a num-
ber of sample voices.
• The original sample and sample voice will be
deleted.
5
1
2
[F2]
[Knob 1] [Knob 2]
3
4
[F4]
.......................... [Knob 1]
3
4
6
[Knob 3] [Knob 4]
[F4]

Advertisement

Table of Contents
loading

Table of Contents