Yamaha RS7000 Owner's Manual page 245

I Select a Job
Use [Knob 1] (CATEGORY) and [Knob 2] (JOB) to move
3.
the cursor to the desired job.
Press [F4] (SELECT) to go to the selected job page.
4.
I Executing Jobs 01 (COPY) ~ 04 (MOVE)
Use [Knob 1] (SAMPLE) and [Knob 2] (KEY) to select the
5.
target sample. Press [F2] (AUDITION) to audition the
selected sample.
For the COPY and MOVE jobs use [Knob 3] (SAMPLE) and
6.
[Knob 4] (TYPE) to select the destination sample.
Press [F4] (DO!) to execute the job.
7.
Press [EXIT] 4 times to return to the original display page.
8.
I Executing Jobs 05 (NORMALIZE) ~ 11 (LOOP REMIX)
5. Use [Knob 1] (SAMPLE) and [Knob 2] (KEY) to select the
target sample. Press [F2] (AUDITION) to audition the
selected sample.
Use [Knob 3] and [Knob 4] to set the job parameters as
6.
required.
Press [F4] (DO!) to execute the job. Press [F2] (AUDITION)
7.
to audition the processed sample.
If the results aren't satisfactory you can re-adjust the parame-
8.
ters using [Knob 3] and [Knob 4] and then press [F4] (DO!)
again to re-execute the job.
Press [F3] (CREATE) to actually save the processed sample
9.
to the target sample number, overwriting the original sample.
If the original sample is a Pitched Sample it will be overwrit-
ten at this point. If the original sample is part of a Sample Kit
Voice a key-number selection page will appear in which
[Knob 2] can be used to select the key number. Pressing [F3]
(OK) then overwrites the sample.
Press [EXIT] 4 times to return to the original display page.
10.
NOTE
When the DELETE or other job has been used
to delete a sample voice assigned to the cur-
rently selected track, pressing [EXIT] will skip
the Sample Edit page and return to the original
page.
01 COPY
Copies the specified sample to a different sample number.
When the target is a Sample Kit Voice, samples assigned to each
key number can be copied individually.
5
1 2
[F2]
[Knob 1] [Knob 2]
1 SAMPLE (Source Sample Number)
[Settings] 001 ~ 128, C001 ~ C128
Specifies the source sample voice.
KEY (Source Key Number)
2
[Settings] C-2 ~ G8
Specifies the key number of the source sample.
NOTE
This parameter is not available when the speci-
fied source sample is a Pitched Voice.
3 SAMPLE
(Destination Sample Number)
[Settings] 001 ~ 128, C001 ~ C128
Specifies the destination sample voice.
TYPE (Destination Type)
4
[Settings] PITCHED, KIT: C-2 ~ G8
Specifies the type of the destination sample voice.
Selects the sample key number when the destination sample
is a Sample Kit Voice type.
NOTE
The PITCHED option is not available when a
Sample Kit Voice is stored in the destination
sample voice number.
AUDITION
5
...................................................................... [F2]
Plays the specified copy source sample.
DO!
6
................................................................................... [F4]
Executes the job.
4. The Sample Jobs
3 4 6
[F4]
[Knob 3] [Knob 4]
.......... [Knob 1]
........................... [Knob 2]
.................... [Knob 3]
............................... [Knob 4]
RS7000 245
5