Yamaha RS7000 Owner's Manual page 289

Memory Protected
SIMM Error
G MIDI Errors
MIDI Buffer Full
G Card/Disk Errors
Card/Disk Full
File Not Found
Bad Card/Disk
Card/Disk Not Ready
Unformatted Card/Disk
Write Protected
Bad File
Can't Change File Name
Illegal File
No Data
Too Long Sample
No Sample Files
Read/Write Error
SCSI Error
Copy Protected
Illegal File Name
Read Only File
Can't Make Folder
Too Deep Folder
Not Empty Folder
Unsupported Disk
Memory protection is turned on, and you have attempted to alter data using a
record, job, or edit operation.
An appropriate pair of expansion SIMMs is not properly installed, or the pair is
not properly matched (Page 20).
The MIDI receive buffer is full and processing cannot continue. Try receiving
the data again.
The card or disk is full and no more data can be saved. Use a new card or disk,
or make space by erasing unwanted data from the card or disk.
The specified file was not found on the card or disk during a load operation. Try
again after re-inserting/re-connecting the card or disk.
The card or disk is unusable. Format the card or disk and try again.
A card or disk is not properly inserted in or connected to the RS7000.
The card or disk is not formatted, or the format is unusable by the RS7000.
Check the card/disk contents.
The card or disk is write protected, or you have attempted to write to a read-
only medium such as CD-ROM.
An unusable file has been loaded.
When executing a Rename operation, a file or folder with the same name
already exists in the specified folder.
The file specified for loading is unusable by the RS7000.
When executing a save operation, the specified song or style contains no data
and cannot be saved.
You have attempted to load a sample which is too long.
The linked sample files cannot be found during a load operation.
An error has occurred while reading from or writing to the card or disk. Check
card insertion, disk connections, or SCSI termination.
A SCSI error has occurred. Check the SCSI connections and termination.
You have attempted to export a copy-protected sample.
The specified file name is unacceptable.
You have attempted to delete, rename, or overwrite a read-only file.
No more folders can be created below the current level because a folder having
the same name exists on the card or disk.
Folders below this level cannot be accessed.
You have attempted to delete a folder that contains data.
The connected disk drive cannot be used.
4. Error Message List
RS7000 289