Yamaha RS7000 Owner's Manual page 128

13. Loading from Memory Card or Disk
FILE TYPE = PATT
4
[Knob 1]
FILE TYPE = ALL, ALL+SYSTEM
4
[Knob 1]
FILE TYPE = SMPL
4 6
[Knob 1] [F1]
File Select
4
..............................................................[Knob 1]
Selects the file to be loaded.
Only files matching the selected file type are shown in the
list.
If the file to be loaded is inside a folder, Use [F1] (
[F2] (OPEN) to move to the folder containing the file.
PATTERN, TRACK
5
[Settings]
Style Select (when FILE TYPE = PATT)
Track Select (when FILE TYPE = SMPL) 01 ~ 16
When the selected FILE TYPE is PATT
Selects the style to which the data will be loaded.
The name of the selected style is displayed.
128 RS7000
Style Name
5
[Knob 4]
Sample Voice Number
7 5
[Knob 4]
[F2]
.............................................[Knob 4]
01 ~ 64
When the selected FILE TYPE is SMPL
Selects the track to which the data will be loaded.
If a sample voice is assigned to the selected track and the
number of the assigned sample is the same as that of the sam-
ple to be loaded, the "REPLACE" appears to indicate that the
existing sample will be replaced by the loaded sample.
If no sample voices are assigned to the selected track then an
empty sample voice number will be displayed and "EMPTY"
will appear to indicate that the sample will be loaded to
empty memory.
8
[F4]
NOTE
• Select the destination style via the PLAY dis-
play.
• When the load operation is executed, any
existing data in the selected style number or
sample voice number will be overwritten.
(UP)
6
.......................................................................... [F1]
8
Moves to the next highest folder in the folder hierarchy.
[F4]
OPEN
7
............................................................................... [F2]
Opens the selected folder, moving down one level in the
folder hierarchy.
When the FILE TYPE is set to PATT or SMPLE, ALL
(.R2A) and PATT (.R2P — only when FILE TYPE = SMPL)
files can be opened like folders to allow individual styles or
sample voices to be selected for loading.
LOAD!
8
............................................................................. [F4]
Executes the load operation.
If the destination style or sample voice already contains data
) and
the "Are You Sure? No[F2]/Yes[F3]" confirmation prompt
will appear.
The confirmation prompt will always appear when the
"ALL" file type is selected.
Press [F3] if it is OK to overwrite the corresponding memory
contents.
Press [F2] to abort the load operation and return to the status
of the RS7000 prior to pressing the [F1] button.