Yamaha RS7000 Owner's Manual page 214

13. The Song Jobs
01 Quantize
Quantization is the process of adjusting the timing of note events
by moving them closer to the nearest exact beat. You can use this
feature, for example, to improve the timing of a performance
recorded in real time.
Details are the same as the PATTERN mode (Page 135).
1
Track
1
[Settings] 01 ~ 16, ALL
Range
2
[Settings]
Measure:Beat:Clock
001:1:000 ~ 999:16:479
I The following parameters are the same as in the
PATTERN mode (Page 135).
3 Quantize Value
4 Quantize Strength
Swing Rate
5
Swing Gate Time
6
02 Modify Velocity
This job alters the velocity values of the specified range of notes.
Velocity changes are calculated as follows:
Adjusted velocity = (original velocity × Rate) + Offset.
If the result is 0 or less, the value is set to 1. If the result is higher
than 127, the value is set to 127.
Details are the same as the PATTERN mode (Page136).
214 RS7000
3 4 2
[Knob 2] [Knob 3]
.
5 6
1 Track
[Settings] 01 ~ 16, ALL
Range
2
[F4]
[Settings]
Measure:Beat:Clock
001:1:000 ~ 999:16:479
I The following parameters are the same as in the
PATTERN mode (Page 136).
Set All
3
Rate
4
Offset
5
This job alters the gate times of the specified range of notes.
Gate time changes are calculated as follows:
Adjusted gate time = (original gate time × Rate) + Offset.
If the result is 0 or less, the value is set to 1.
Details are the same as the PATTERN mode (Page 137).
Track
1
[Settings] 01 ~ 16, ALL
1 3 4 2
[Knob 2] [Knob 3]
03 Modify Gate Time
1 3 4 2
[Knob 3]
[Knob 2]
5
[F4]
5
[F4]