Yamaha RS7000 Owner's Manual page 129

NOTE
When the file type is PATT and the style to be
loaded includes common sample voices, if com-
mon sample voices with the same numbers
already exist in the internal memory the "ALL
SKIP" and "RENUMBER" options become avail-
able.
When "ALL SKIP" is selected common sample
voices with duplicate numbers are not loaded.
When "RENUMBER" is selected the common
sample voices are loaded into vacant numbers.
Refer to "About File Types" on page 116 for
more information.
[2] Import Page
Loads sequence or sample data which was saved to a SCSI disk
or memory card by other music equipment or a personal com-
puter.
Import Procedure
Select the pattern to which the data is to be imported while in
1.
the PATTERN Play or Patch mode.
Press the [LOAD] button twice from the PATTERN Play or
2.
Patch mode to go to the Import page.
Use [Knob 2] (FILE TYPE) to select the type of file you want
3.
to import.
Press [F1] (CARD/SCSI) to specify whether you want to
4.
import from a memory card or disk.
5. Press [F4] (OK) to go to the import execution page.
Use [Knob 1] to select the file to be imported.
6.
If the file to be imported is inside a folder, Use [F1] (
and [F2] (OPEN) to move to the folder containing the file.
If the file to be imported is a sample, use [Knob 3] (TRACK)
7.
and [Knob 4] (TYPE) to select the track and sample voice
type to which the data is to be imported.
Press [F4] to execute the import operation.
8.
If the destination style or sample voice already contains data
the "Are You Sure? No[F2]/Yes[F3]" confirmation prompt
will appear. The confirmation prompt will always appear
when the "ALL" file type is selected.
Press [F3] if it is OK to overwrite the corresponding memory
contents.
Press [F2] to abort the import operation and return to the sta-
tus of the RS7000 prior to pressing the [F1] button.
13. Loading from Memory Card or Disk
Press [EXIT] twice to return to the PATTERN Play or Patch
9.
mode.
NOTE
When the import source is a SCSI disk it is neces-
sary to select the appropriate SCSI ID and parti-
tion in the SCSI Setup page.
Display Parameters
CARD or DISK = CARD
2 1
[F1] [Knob 2]
CARD or DISK = SCSI
Partition Name
SCSI ID
Disk Type Icon
2 1
)
[F1] [Knob 2]
FILE TYPE
1
............................................................. [Knob 2]
[Settings] SAMPLE, SMF, RM1x PATT
SAMPLE........ Sample data, WAV files (.WAV)
and AIFF files (.AIF) can be
loaded into the specified internal
sample voice number.
SMF (Standard
MIDI File)....... Sequence data can be loaded into
the currently selected pattern
from an SMF (Standard MIDI File,
format-0 or 1) type file.
RM1x PATT... Pattern data saved in RM1x pat-
tern format can be loaded into the
currently selected RS7000 style.
[PATTERN] → [LOAD] × 2
3
[F4]
3
[F4]
RS7000 129
2