Using Bla Feature On The Ip Phone - Yealink SIP-T42S User Manual

User Guide for the SIP-T42S IP Phone
Click on Advanced, and then select Draft BLA from the pull-down list of Shared Line.
2.
Enter the desired number in the BLA Number field.
3.
Click Confirm to accept the change.
4.

Using BLA Feature on the IP Phone

This section provides you with detailed information on using the SIP-T42S IP phone in a BLA
scenario. In a BLA scenario, the status of the line key LED which associates with a bridged line
will change. For more information on line key LED indicators, refer to
You can do the following using the IP phone in a BLA scenario:
Placing calls

Answering calls

Place a call on hold

Retrieving a held call

Placing Calls
You can have one call or multiple calls on the bridged line.
To place a call on the bridged line:
Do one of following:
- Enter the desired number using the keypad when the phone is idle. Press
the Send soft key.
The phone will dial the entered number.
176
LED Instructions on page 5.
, , or